Synthetic Powershift Transmission Fluid SAE 50W (CTL)

Advanced Formulation for Powershift and Manual Transmissions, Wet Brakes and Final Drives.

Package sizes include:

5-Gallon Pail
55-Gallon Drum

(Also see SAE 10 and SAE 30 Powershift Transmission Fluid)

PRODUCT DESCRIPTION

AMSOIL Synthetic Powershift Transmission Fluids are specifically designed for high-torque heavy-duty powershift transmissions. Formulated for extended drain intervals, Powershift Transmission Fluids contain top-quality synthetic base stocks and a high level of top-quality additives selected specifically for powershift transmissions. They offer exceptional transmission friction performance, smooth brake operation, reduced gear and bearing wear and increased equipment life.

Friction Characteristics

AMSOIL Synthetic Powershift Transmission Fluids are compatible with common metallic and non-metallic friction materials. Their stable frictional characteristics help eliminate excessive brake noise and vibration. Their nonslip friction durability virtually eliminates clutch slippage, which can cause glazing or friction surface deposits and material degradation. Powershift Transmission Fluids are formulated to deliver responsive yet smooth clutch engagements, excellent power transmission through clutches and synchronizers and superior hydraulic fluid performance for servo-equipped units.

Wear Protection

AMSOIL Synthetic Powershift Transmission Fluids exceed the wear requirements of the Caterpillar TO-4 specification and are formulated without viscosity index improvers for superior shear stability. This superior shear stability allows Powershift Transmission Fluids to maintain grade throughout service life, providing long-term protection against equipment wear, even when equipment is frequently subjected to sustained periods of applied pressure or high horsepower and high torque.

Superior High and Low Temperature Performance

In high temperatures, AMSOIL Synthetic Powershift Transmission Fluids effectively protect components from wear. Their superior oxidative and thermal stability inhibits the formation of varnish, deposits and sludge so equipment runs clean. Synthetic Powershift Transmission Fluids are excellent heat transfer fluids and may help hot-running equipment operate cooler and run in its optimal temperature range. In low temperatures, Synthetic Powershift Transmission Fluids flow readily for dependable startup and post-startup protection.

Copper Corrosion, Rust and Foam Inhibition

AMSOIL Synthetic Powershift Transmission Fluids protect equipment from copper corrosion and rust, even during equipment storage. Synthetic Powershift Transmission Fluids do not foam in service, protecting equipment from the metal-to-metal contact and wear that occurs with use of foam-filled fluids.

Performance Data

AMSOIL SAE 50W (CTL) Synthetic Powershift Transmission Fluid is Recommended for Applications Requiring the Following Specifications: Caterpillar TO-4 Twin Disc Komatsu KES 07.868.1 Rockwell/Eaton/Fuller CD-50 (PS-081) API GL-1

Applications

Dozers
Semi-trucks manual transmissions
Wheel loaders and crawlers
Backhoe loaders
Cranes
Off-road fork trucks
Harbor handling equipment
Railway equipment
Mining equipment
Road graders
Commercial boats

AMSOIL Synthetic SAE 50 Powershift Transmission Fluid is formulated for Fuller CD-50 performance and is ideal for use in Rockwell/Eaton/Fuller, Spicer, Fabco, Warner and other large truck manual transmissions. AMSOIL Synthetic SAE 50 Powershift Transmission Fluids can be used in Caterpillar, Allison, Komatsu, Clark, Hurth, Borg-Warner, Twin Disc, Voith, ZF, Funk and Brockhouse powershift-type transmissions and Eaton/Rockwell/Fuller transmissions.

Installation

AMSOIL Synthetic Powershift Transmission Fluids are fully compatible with other TO-4 fluids used in powershift applications. To install AMSOIL Synthetic Powershift Transmission Fluids, drain the fluid in the system, replace the filter (if so equipped) and install the appropriate Powershift Transmission Fluid.

Service Life

AMSOIL Synthetic Powershift Transmission Fluids provide extended service life beyond conventional petroleum fluids if Synthetic Powershift Transmission Fluids are kept free of dirt and moisture. Oil analysis is recommended if extending service intervals beyond equipment manufacturer recommendations. AMSOIL Synthetic Powershift Transmission Fluids may be used for 250,000 miles or two years (whichever comes first) in CD-50 manual transmission applications.

AMSOIL Limited Warranty

Typical Technical Properties

AMSOIL SAE 50W Synthetic Powershift Transmission Fluid (CTL)
SAE Viscosity Grade	50W
ISO Viscosity Grade	150
Kinematic Viscosity @ 100° C, cSt (ASTM D-445)	19.0
Kinematic Viscosity @ 40° C, cSt (ASTM D-445)	149.2
Viscosity Index (ASTM D-2270)	144
Flash Point °C (°F) (ASTM D-92)	266 (511)
Fire Point °C (°F) (ASTM D-92)	286 (547)
Pour Point °C (°F) (ASTM D-97)	-36 (-33)
Four Ball Wear Test (ASTM D-4172B @ 40 kg. 75°C, 1200 rpm, 1 hour), Scar, mm	0.35
Noack Volatility, % weight loss (ASTM D-5800)	3.5
(Also see SAE 10 and SAE 30 Powershift Transmission Fluids)

AMSOIL PURCHASING ACCOUNT OPTIONS

1. Purchase AMSOIL products as a retail customer...
Buy AMSOIL online through the AMSOIL Online Store Today

2. Purchase AMSOIL now at wholesale pricing...
Sign up today to start saving money as an AMSOIL Preferred Customer - Buy Wholesale!!

3. Get the benefits of owning your own independent AMSOIL Business.. Start Today!!
AMSOIL Dealer Online Sign up and Information

4. Business owners looking to add a successful product line to your store shelves or install AMSOIL products...
AMSOIL "Retail On The Shelf" Account Sign Up Materials - OR Call: 800-985-5823

5. Increase your companies bottom line by using AMSOIL Synthetic Lubricants in your vehicles and equipment.
AMSOIL Commercial Business Account Sign Up Materials - OR Call: 800-985-5823

If you need further information on these types of account please feel free to give us a call and we can help: 800-985-5823

Brian Klinkner - Certified Amsoil Direct Jobber #1642716 - 800-985-5823